Please input your companyname!
Quality is our Soul Manufacturing lithium battery chargers POE injector power adapter Power adapter
Add to Cart
28V constant voltagePOE adapter 100Mbps for CCTV and suiveillance system
Introduction:
The high power passive 10/100M Base-T PoE Injector can realize synchronous delivery of device network data and power via one Ethernet cable (Cat.5 or better). The output power of per port is up to 40W, which can serve as an outlet for a PoE device (powering via RJ45 port).
Features:
Specifications:
| Model | POE2800140 | |
| OUTPUT | DC Voltage | 28V |
| Rated Current | 1.4A | |
| Current Range | 0~1400mA | |
| Rated Power | 40W | |
| Ripple & Noise (mv-pp) | 1% Vp-p max. | |
| Regulation Accuracy | ±10.0% | |
| Set-up Time | <1.5S (230VAC input, full load) | |
| Hold-up Time | >50mS(230VAC input, full load) | |
| INPUT | Voltage Range | 100-240VAC |
| Frequency Range | 47-63Hz | |
| AC Input Current (Max.) | <700mA | |
| protection | Internal Primary Current Fuse, Inrush Limiting | |
| PROTECTION | Shout Circuit | fuse |
| ENVIRONMENT | Operating Temp. & Hum. | 0℃~40℃, 20%-90%RH (non-condensing) |
| Storage Temp. & Hum. | -20℃~70℃, 20%-95%RH (non-condensing) | |
| GENERAL SPECIFICATIONS | Leakage Current | Less than 250us |
| Inrush Current | 30A | |
| Efficiency | 80%(average) | |
| OTHERS | Dimension (L*W*H mm) | 114*50*30mm |
| Weight (g) | 146±10g | |
| Cooling | Free Air Convection | |
| Packing | Carton | |