Please input your companyname!
Quality is our Soul Manufacturing lithium battery chargers POE injector power adapter Power adapter
Add to Cart
DOE VI 24V1A 100Mbps Mid-spans poe injector for outdoor ptz ip camera poe
Introduction:
The high power passive 10/100M Base-T PoE Injector can realize synchronous delivery of device network data and power via one Ethernet cable (Cat.5 or better). The output power of per port is up to 24W, which can serve as an outlet for a PoE device (powering via RJ45 port).
Features:
Specifications:
| Model | POE2400100 | |
| OUTPUT | DC Voltage | 24V |
| Rated Current | 1A | |
| Current Range | 0~1000mA | |
| Rated Power | 24W | |
| Ripple & Noise (mv-pp) | 1% Vp-p max. | |
| Regulation Accuracy | ±10.0% | |
| Set-up Time | <1.5S (230VAC input, full load) | |
| Hold-up Time | >50mS(230VAC input, full load) | |
| INPUT | Voltage Range | 100-240VAC |
| Frequency Range | 47-63Hz | |
| AC Input Current (Max.) | <700mA | |
| protection | Internal Primary Current Fuse, Inrush Limiting | |
| PROTECTION | Shout Circuit | fuse |
| ENVIRONMENT | Operating Temp. & Hum. | 0℃~40℃, 20%-90%RH (non-condensing) |
| Storage Temp. & Hum. | -20℃~70℃, 20%-95%RH (non-condensing) | |
| GENERAL SPECIFICATIONS | Leakage Current | Less than 250us |
| Inrush Current | 30A | |
| Efficiency | 87%(average) | |
| OTHERS | Dimension (L*W*H mm) | 120*69*50mm |
| Weight (g) | 240±10g | |
| Cooling | Free Air Convection | |
| Packing | Carton | |
JKW is a leading manufacturer and exporter of UPS,PoE Switch, PoE injector and Power adapters. Our advanced and professional technology, complete production lines, experienced staff and strict corporate system ensure our products quality. We pride ourselves on quality products, service and pricing, and believe that the three aspects are equally important to ensure the long-term success of overseas purchasing program.
