Please input your companyname!
Quality is our Soul Manufacturing lithium battery chargers POE injector power adapter Power adapter
Add to Cart
48V0.7A Lan RJ45 POE Active Gigabit POE injector for NVR & CCTV
Introduction:
The high power active 10/100/1000 Base-T PoE Injector can realize synchronous delivery of device network data and power via one Ethernet cable (Cat.5 or better). The output power of per port is up to 33.6W, which can serve as an outlet for a PoE device (powering via RJ45 port).
Features:
Specifications:
| Model | POE4800070GA | |
| OUTPUT | DC Voltage | 48V |
| Rated Current | 0.7A | |
| Current Range | 0~700mA | |
| Rated Power | 33.6W | |
| Ripple & Noise (mv-pp) | 1% Vp-p max. | |
| Regulation Accuracy | ±10.0% | |
| Set-up Time | <1.5S (230VAC input, full load) | |
| Hold-up Time | >50mS(230VAC input, full load) | |
| INPUT | Voltage Range | 100-240VAC |
| Frequency Range | 47-63Hz | |
| AC Input Current (Max.) | <700mA | |
| protection | Internal Primary Current Fuse, Inrush Limiting | |
| PROTECTION | Shout Circuit | fuse |
| ENVIRONMENT | Operating Temp. & Hum. | 0℃~40℃, 20%-90%RH (non-condensing) |
| Storage Temp. & Hum. | -30℃~85℃, 20%-95%RH (non-condensing) | |
| GENERAL SPECIFICATIONS | Leakage Current | Less than 250us |
| Inrush Current | 30A | |
| Efficiency | 80%(average) | |
| OTHERS | Dimension (L*W*H mm) | 121*58*33mm |
| Weight (g) | 172±15g | |
| Cooling | Free Air Convection | |
| Packing |
Carton |
|